BLVPJ - RTV664A SILICONE RUBBER COMPOUND
- MSDS: BLVPJ
- Manufacturer: GENERAL ELECTRIC CO SILICONE PRODUCTS DIV
- Product Name: RTV664A SILICONE RUBBER COMPOUND
- National Stock Number: 8030-00N020587
Product Identification
Product ID:RTV664A SILICONE RUBBER COMPOUND
MSDS Date:12/11/1990
FSC:8030
NIIN:00N020587
MSDS Number: BLVPJ
Responsible Party
WATERFORD, NY 12188
US
Emergency Phone: 518-237-3330
Info Phone: 518-237-3330
Preparer: GCD
Cage: 01139
Contractor
Telephone: 518-237-3330/800-332-3390
Cage: 01139
Ingredients
BENZENE (SARA III)
CAS: 71-43-2
RTECS: CY1400000
Fraction By Weight: <0.0001%
OSHA PEL SEE 1910.1028
ACGIH TLV: 10 PPM; A2; 9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
VINYL POLYSILOXANE
CAS: 68083-19-2
Fraction By Weight: 30-60%
CALCIUM CARBONATE (MAY BE MARBLE OR LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 1-5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9394
SILICA, CRYSTALLINE - QUARTZ
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 30-60%
OSHA PEL SEE TABLE Z-3
ACGIH TLV: 0.1 MG/M3 RDUST;9394
UN-NAMED INGREDIENT CLAIMED AS "PROPRIETARY"
Fraction By Weight: 10-30%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:*ACUTE*INGEST:"NONE KNOWN"
SKIN:IRRITATION IS NOT EXPECTED BUT MAY OCCUR IN CERTAIN SENSITIVE
INDIVIDUALS. INHALATION:"NONE KNOWN" EYE:MAY IRRITATE EYES.
*CHRONIC*"NONE KNOWN"
Explanation of Carcinogenicity:CONTAINS <1 PPM BENZENE [71-43-2] WHICH
IS LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
Effects of Overexposure:INGEST:"NONE KNOWN" SKIN:IRRITATION IS NOT
EXPECTED BUT MAY OCCUR IN CERTAIN SENSITIVE INDIVIDUALS.
INHALATION:"NONE KNOWN" EYE:MAY IRRITATE EYES.
Medical Cond Aggravated by Exposure:"NONE KNOWN"
First Aid
First Aid:INGEST:RINSE MOUTH WITH WATER SEVERAL TIMES. SKIN:WASH WITH
SOAP & WATER. INHAL:"NONE KNOWN" EYES:IMMEDIATELY FLUSH W/PLENTY
OF WATER FOR A MINIMUM OF 15 MIN & GET MEDICAL ATTENTION IF
IRRITATION PER SISTS.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>400F, >204C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:"NONE KNOWN"
Unusual Fire/Explosion Hazard:NO INFORMATION GIVEN ON MSDS BY MFR.
Accidental Release
Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATL & PUT
IN A CONTR FOR DISPOSAL. WASH WALKING SURFACES W/DETERGENT & WATER
TO REDUCE SLIPPING HAZARD. WEAR PROPER PROTECTIVE EQUIPMENT AS
SPECIFIED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:UNCURED PRODUCT CONTACT MAY IRRITATE
EYES.
Other Precautions:NO INFORMATION GIVEN ON MSDS BY MFR.
Exposure Controls
Respiratory Protection:"NONE KNOWN"
Ventilation:"NONE KNOWN"
Protective Gloves:CLOTH GLOVES.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH STATIONS.
Work Hygienic Practices:MFR: ? HMIS:USE GOOD INDUSTRIAL HYGIENE
PRACTICE. AVOID UNNECESSARY CONTACT. WASH THOROUGHLY BEFORE EATING
OR DRINKING.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:>580F,>304C
Vapor Pres:NEGLIGIBLE
Vapor Density:NONE
Spec Gravity:1.28
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT GREY/BEIGE PASTE, ODORLESS
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
"NONE KNOWN"
Stability Condition to Avoid:"NONE KNOWN"
Hazardous Decomposition Products:CARBON DIOXIDE, SILICON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.